VISION MX 2.9 OUT

The VISION MX 2.9 OUT is the only outdoor panel in the VISION MX range. Same cabinet format as the indoor models — 500 × 500 mm — but everything else changes: IP65 front and rear, 4,500 nits, and a 7,680 Hz refresh rate, twice that of the indoor series.

The name says 2.9, the panel is 2.976

The actual pitch is 2.976 mm — 500 divided by 168. Each cabinet therefore carries 168 × 168 pixels, for 112,896 pixels per square metre. The grid stops being perceptible at 5.1 metres and fine detail is fully resolved at 10.2 metres.

That is an unusually fine pitch for outdoor use. Most open-air walls run between 3.9 and 6.9 mm; here you go below three millimetres, which is only justified if the audience comes close — festival pit, activation village, proximity stage.

IP65 on both sides, and it matters

Many panels advertised as "outdoor" are sealed only on the front face, the rear protected by an enclosure or a cover. Here both faces are IP65: dust-tight, protected against water jets from any direction, rear face included.

In rental, that is the difference between a wall you rig outdoors with no enclosure and one that needs a closed structure. At a festival where the back of the screen is exposed to wind and driving rain, it decides whether the job holds.

7,680 Hz: the figure that reveals the use

Twice the 3,840 Hz of the indoor series. It is not a luxury: an outdoor screen on a job is almost always filmed — live capture, broadcast, social media. A doubled refresh widens the window in which the shutter sees the screen lit, and makes the panel tolerant of camera settings you cannot always control in the field.

Construction

SMD1415 LEDs, four 250 × 250 mm modules, 500 × 500 × 70 mm cabinet, 7.95 kg per panel or 32 kg per square metre, 16-bit greyscale, colour temperature adjustable from 3,000 to 10,000 K.

Position in the range

For indoor use, the VISION MX 2.8 and VISION MX 3.9 cover the same uses without the sealing overhead. For a fixed outdoor installation rather than a live job, the SUNLITE range is built to stay in place.

Avec un pitch de 2.9 mm, VISION MX 2.9 OUT couvre les distances de vision moyennes (3 à 8 m). Conçu pour un usage outdoor, ce module combine 4500 nits et 7680 Hz, soit l'ensemble des paramètres attendus sur une installation B2B professionnelle.

• Auditoriums & salles de conférence
• Retail & galeries commerciales
• Événementiel & studios XR

• Distance de vision optimale : 2.9 m à 8.7 m.
• Dimensionnement : surface multiple de la dalle native pour éviter les découpes.
• Stock SAV : 2 à 3 % de modules de spare recommandés.